Package SCons :: Module Taskmaster
[hide private]
[frames] | no frames]

Source Code for Module SCons.Taskmaster

   1  # 
   2  # Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The SCons Foundation 
   3  # 
   4  # Permission is hereby granted, free of charge, to any person obtaining 
   5  # a copy of this software and associated documentation files (the 
   6  # "Software"), to deal in the Software without restriction, including 
   7  # without limitation the rights to use, copy, modify, merge, publish, 
   8  # distribute, sublicense, and/or sell copies of the Software, and to 
   9  # permit persons to whom the Software is furnished to do so, subject to 
  10  # the following conditions: 
  11  # 
  12  # The above copyright notice and this permission notice shall be included 
  13  # in all copies or substantial portions of the Software. 
  14  # 
  15  # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY 
  16  # KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE 
  17  # WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
  18  # NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE 
  19  # LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION 
  20  # OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION 
  21  # WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 
  22   
  23  __doc__ = """ 
  24  Generic Taskmaster module for the SCons build engine. 
  25   
  26  This module contains the primary interface(s) between a wrapping user 
  27  interface and the SCons build engine.  There are two key classes here: 
  28   
  29      Taskmaster 
  30          This is the main engine for walking the dependency graph and 
  31          calling things to decide what does or doesn't need to be built. 
  32   
  33      Task 
  34          This is the base class for allowing a wrapping interface to 
  35          decide what does or doesn't actually need to be done.  The 
  36          intention is for a wrapping interface to subclass this as 
  37          appropriate for different types of behavior it may need. 
  38   
  39          The canonical example is the SCons native Python interface, 
  40          which has Task subclasses that handle its specific behavior, 
  41          like printing "`foo' is up to date" when a top-level target 
  42          doesn't need to be built, and handling the -c option by removing 
  43          targets as its "build" action.  There is also a separate subclass 
  44          for suppressing this output when the -q option is used. 
  45   
  46          The Taskmaster instantiates a Task object for each (set of) 
  47          target(s) that it decides need to be evaluated and/or built. 
  48  """ 
  49   
  50  __revision__ = "src/engine/SCons/Taskmaster.py 5134 2010/08/16 23:02:40 bdeegan" 
  51   
  52  from itertools import chain 
  53  import operator 
  54  import sys 
  55  import traceback 
  56   
  57  import SCons.Errors 
  58  import SCons.Node 
  59  import SCons.Warnings 
  60   
  61  StateString = SCons.Node.StateString 
  62  NODE_NO_STATE = SCons.Node.no_state 
  63  NODE_PENDING = SCons.Node.pending 
  64  NODE_EXECUTING = SCons.Node.executing 
  65  NODE_UP_TO_DATE = SCons.Node.up_to_date 
  66  NODE_EXECUTED = SCons.Node.executed 
  67  NODE_FAILED = SCons.Node.failed 
  68   
  69   
  70  # A subsystem for recording stats about how different Nodes are handled by 
  71  # the main Taskmaster loop.  There's no external control here (no need for 
  72  # a --debug= option); enable it by changing the value of CollectStats. 
  73   
  74  CollectStats = None 
  75   
76 -class Stats(object):
77 """ 78 A simple class for holding statistics about the disposition of a 79 Node by the Taskmaster. If we're collecting statistics, each Node 80 processed by the Taskmaster gets one of these attached, in which case 81 the Taskmaster records its decision each time it processes the Node. 82 (Ideally, that's just once per Node.) 83 """
84 - def __init__(self):
85 """ 86 Instantiates a Taskmaster.Stats object, initializing all 87 appropriate counters to zero. 88 """ 89 self.considered = 0 90 self.already_handled = 0 91 self.problem = 0 92 self.child_failed = 0 93 self.not_built = 0 94 self.side_effects = 0 95 self.build = 0
96 97 StatsNodes = [] 98 99 fmt = "%(considered)3d "\ 100 "%(already_handled)3d " \ 101 "%(problem)3d " \ 102 "%(child_failed)3d " \ 103 "%(not_built)3d " \ 104 "%(side_effects)3d " \ 105 "%(build)3d " 106
107 -def dump_stats():
108 for n in sorted(StatsNodes, key=lambda a: str(a)): 109 print (fmt % n.stats.__dict__) + str(n)
110 111 112
113 -class Task(object):
114 """ 115 Default SCons build engine task. 116 117 This controls the interaction of the actual building of node 118 and the rest of the engine. 119 120 This is expected to handle all of the normally-customizable 121 aspects of controlling a build, so any given application 122 *should* be able to do what it wants by sub-classing this 123 class and overriding methods as appropriate. If an application 124 needs to customze something by sub-classing Taskmaster (or 125 some other build engine class), we should first try to migrate 126 that functionality into this class. 127 128 Note that it's generally a good idea for sub-classes to call 129 these methods explicitly to update state, etc., rather than 130 roll their own interaction with Taskmaster from scratch. 131 """
132 - def __init__(self, tm, targets, top, node):
133 self.tm = tm 134 self.targets = targets 135 self.top = top 136 self.node = node 137 self.exc_clear()
138
139 - def trace_message(self, method, node, description='node'):
140 fmt = '%-20s %s %s\n' 141 return fmt % (method + ':', description, self.tm.trace_node(node))
142
143 - def display(self, message):
144 """ 145 Hook to allow the calling interface to display a message. 146 147 This hook gets called as part of preparing a task for execution 148 (that is, a Node to be built). As part of figuring out what Node 149 should be built next, the actually target list may be altered, 150 along with a message describing the alteration. The calling 151 interface can subclass Task and provide a concrete implementation 152 of this method to see those messages. 153 """ 154 pass
155
156 - def prepare(self):
157 """ 158 Called just before the task is executed. 159 160 This is mainly intended to give the target Nodes a chance to 161 unlink underlying files and make all necessary directories before 162 the Action is actually called to build the targets. 163 """ 164 T = self.tm.trace 165 if T: T.write(self.trace_message(u'Task.prepare()', self.node)) 166 167 # Now that it's the appropriate time, give the TaskMaster a 168 # chance to raise any exceptions it encountered while preparing 169 # this task. 170 self.exception_raise() 171 172 if self.tm.message: 173 self.display(self.tm.message) 174 self.tm.message = None 175 176 # Let the targets take care of any necessary preparations. 177 # This includes verifying that all of the necessary sources 178 # and dependencies exist, removing the target file(s), etc. 179 # 180 # As of April 2008, the get_executor().prepare() method makes 181 # sure that all of the aggregate sources necessary to build this 182 # Task's target(s) exist in one up-front check. The individual 183 # target t.prepare() methods check that each target's explicit 184 # or implicit dependencies exists, and also initialize the 185 # .sconsign info. 186 executor = self.targets[0].get_executor() 187 executor.prepare() 188 for t in executor.get_action_targets(): 189 t.prepare() 190 for s in t.side_effects: 191 s.prepare()
192
193 - def get_target(self):
194 """Fetch the target being built or updated by this task. 195 """ 196 return self.node
197
198 - def needs_execute(self):
199 # TODO(deprecate): "return True" is the old default behavior; 200 # change it to NotImplementedError (after running through the 201 # Deprecation Cycle) so the desired behavior is explicitly 202 # determined by which concrete subclass is used. 203 #raise NotImplementedError 204 msg = ('Taskmaster.Task is an abstract base class; instead of\n' 205 '\tusing it directly, ' 206 'derive from it and override the abstract methods.') 207 SCons.Warnings.warn(SCons.Warnings.TaskmasterNeedsExecuteWarning, msg) 208 return True
209
210 - def execute(self):
211 """ 212 Called to execute the task. 213 214 This method is called from multiple threads in a parallel build, 215 so only do thread safe stuff here. Do thread unsafe stuff in 216 prepare(), executed() or failed(). 217 """ 218 T = self.tm.trace 219 if T: T.write(self.trace_message(u'Task.execute()', self.node)) 220 221 try: 222 everything_was_cached = 1 223 for t in self.targets: 224 if t.retrieve_from_cache(): 225 # Call the .built() method without calling the 226 # .push_to_cache() method, since we just got the 227 # target from the cache and don't need to push 228 # it back there. 229 t.set_state(NODE_EXECUTED) 230 t.built() 231 else: 232 everything_was_cached = 0 233 break 234 if not everything_was_cached: 235 self.targets[0].build() 236 except SystemExit: 237 exc_value = sys.exc_info()[1] 238 raise SCons.Errors.ExplicitExit(self.targets[0], exc_value.code) 239 except SCons.Errors.UserError: 240 raise 241 except SCons.Errors.BuildError: 242 raise 243 except Exception, e: 244 buildError = SCons.Errors.convert_to_BuildError(e) 245 buildError.node = self.targets[0] 246 buildError.exc_info = sys.exc_info() 247 raise buildError
248
249 - def executed_without_callbacks(self):
250 """ 251 Called when the task has been successfully executed 252 and the Taskmaster instance doesn't want to call 253 the Node's callback methods. 254 """ 255 T = self.tm.trace 256 if T: T.write(self.trace_message('Task.executed_without_callbacks()', 257 self.node)) 258 259 for t in self.targets: 260 if t.get_state() == NODE_EXECUTING: 261 for side_effect in t.side_effects: 262 side_effect.set_state(NODE_NO_STATE) 263 t.set_state(NODE_EXECUTED)
264
265 - def executed_with_callbacks(self):
266 """ 267 Called when the task has been successfully executed and 268 the Taskmaster instance wants to call the Node's callback 269 methods. 270 271 This may have been a do-nothing operation (to preserve build 272 order), so we must check the node's state before deciding whether 273 it was "built", in which case we call the appropriate Node method. 274 In any event, we always call "visited()", which will handle any 275 post-visit actions that must take place regardless of whether 276 or not the target was an actual built target or a source Node. 277 """ 278 T = self.tm.trace 279 if T: T.write(self.trace_message('Task.executed_with_callbacks()', 280 self.node)) 281 282 for t in self.targets: 283 if t.get_state() == NODE_EXECUTING: 284 for side_effect in t.side_effects: 285 side_effect.set_state(NODE_NO_STATE) 286 t.set_state(NODE_EXECUTED) 287 t.push_to_cache() 288 t.built() 289 t.visited()
290 291 executed = executed_with_callbacks 292
293 - def failed(self):
294 """ 295 Default action when a task fails: stop the build. 296 297 Note: Although this function is normally invoked on nodes in 298 the executing state, it might also be invoked on up-to-date 299 nodes when using Configure(). 300 """ 301 self.fail_stop()
302
303 - def fail_stop(self):
304 """ 305 Explicit stop-the-build failure. 306 307 This sets failure status on the target nodes and all of 308 their dependent parent nodes. 309 310 Note: Although this function is normally invoked on nodes in 311 the executing state, it might also be invoked on up-to-date 312 nodes when using Configure(). 313 """ 314 T = self.tm.trace 315 if T: T.write(self.trace_message('Task.failed_stop()', self.node)) 316 317 # Invoke will_not_build() to clean-up the pending children 318 # list. 319 self.tm.will_not_build(self.targets, lambda n: n.set_state(NODE_FAILED)) 320 321 # Tell the taskmaster to not start any new tasks 322 self.tm.stop() 323 324 # We're stopping because of a build failure, but give the 325 # calling Task class a chance to postprocess() the top-level 326 # target under which the build failure occurred. 327 self.targets = [self.tm.current_top] 328 self.top = 1
329
330 - def fail_continue(self):
331 """ 332 Explicit continue-the-build failure. 333 334 This sets failure status on the target nodes and all of 335 their dependent parent nodes. 336 337 Note: Although this function is normally invoked on nodes in 338 the executing state, it might also be invoked on up-to-date 339 nodes when using Configure(). 340 """ 341 T = self.tm.trace 342 if T: T.write(self.trace_message('Task.failed_continue()', self.node)) 343 344 self.tm.will_not_build(self.targets, lambda n: n.set_state(NODE_FAILED))
345
346 - def make_ready_all(self):
347 """ 348 Marks all targets in a task ready for execution. 349 350 This is used when the interface needs every target Node to be 351 visited--the canonical example being the "scons -c" option. 352 """ 353 T = self.tm.trace 354 if T: T.write(self.trace_message('Task.make_ready_all()', self.node)) 355 356 self.out_of_date = self.targets[:] 357 for t in self.targets: 358 t.disambiguate().set_state(NODE_EXECUTING) 359 for s in t.side_effects: 360 # add disambiguate here to mirror the call on targets above 361 s.disambiguate().set_state(NODE_EXECUTING)
362
363 - def make_ready_current(self):
364 """ 365 Marks all targets in a task ready for execution if any target 366 is not current. 367 368 This is the default behavior for building only what's necessary. 369 """ 370 T = self.tm.trace 371 if T: T.write(self.trace_message(u'Task.make_ready_current()', 372 self.node)) 373 374 self.out_of_date = [] 375 needs_executing = False 376 for t in self.targets: 377 try: 378 t.disambiguate().make_ready() 379 is_up_to_date = not t.has_builder() or \ 380 (not t.always_build and t.is_up_to_date()) 381 except EnvironmentError, e: 382 raise SCons.Errors.BuildError(node=t, errstr=e.strerror, filename=e.filename) 383 384 if not is_up_to_date: 385 self.out_of_date.append(t) 386 needs_executing = True 387 388 if needs_executing: 389 for t in self.targets: 390 t.set_state(NODE_EXECUTING) 391 for s in t.side_effects: 392 # add disambiguate here to mirror the call on targets in first loop above 393 s.disambiguate().set_state(NODE_EXECUTING) 394 else: 395 for t in self.targets: 396 # We must invoke visited() to ensure that the node 397 # information has been computed before allowing the 398 # parent nodes to execute. (That could occur in a 399 # parallel build...) 400 t.visited() 401 t.set_state(NODE_UP_TO_DATE)
402 403 make_ready = make_ready_current 404
405 - def postprocess(self):
406 """ 407 Post-processes a task after it's been executed. 408 409 This examines all the targets just built (or not, we don't care 410 if the build was successful, or even if there was no build 411 because everything was up-to-date) to see if they have any 412 waiting parent Nodes, or Nodes waiting on a common side effect, 413 that can be put back on the candidates list. 414 """ 415 T = self.tm.trace 416 if T: T.write(self.trace_message(u'Task.postprocess()', self.node)) 417 418 # We may have built multiple targets, some of which may have 419 # common parents waiting for this build. Count up how many 420 # targets each parent was waiting for so we can subtract the 421 # values later, and so we *don't* put waiting side-effect Nodes 422 # back on the candidates list if the Node is also a waiting 423 # parent. 424 425 targets = set(self.targets) 426 427 pending_children = self.tm.pending_children 428 parents = {} 429 for t in targets: 430 # A node can only be in the pending_children set if it has 431 # some waiting_parents. 432 if t.waiting_parents: 433 if T: T.write(self.trace_message(u'Task.postprocess()', 434 t, 435 'removing')) 436 pending_children.discard(t) 437 for p in t.waiting_parents: 438 parents[p] = parents.get(p, 0) + 1 439 440 for t in targets: 441 for s in t.side_effects: 442 if s.get_state() == NODE_EXECUTING: 443 s.set_state(NODE_NO_STATE) 444 for p in s.waiting_parents: 445 parents[p] = parents.get(p, 0) + 1 446 for p in s.waiting_s_e: 447 if p.ref_count == 0: 448 self.tm.candidates.append(p) 449 450 for p, subtract in parents.items(): 451 p.ref_count = p.ref_count - subtract 452 if T: T.write(self.trace_message(u'Task.postprocess()', 453 p, 454 'adjusted parent ref count')) 455 if p.ref_count == 0: 456 self.tm.candidates.append(p) 457 458 for t in targets: 459 t.postprocess()
460 461 # Exception handling subsystem. 462 # 463 # Exceptions that occur while walking the DAG or examining Nodes 464 # must be raised, but must be raised at an appropriate time and in 465 # a controlled manner so we can, if necessary, recover gracefully, 466 # possibly write out signature information for Nodes we've updated, 467 # etc. This is done by having the Taskmaster tell us about the 468 # exception, and letting 469
470 - def exc_info(self):
471 """ 472 Returns info about a recorded exception. 473 """ 474 return self.exception
475
476 - def exc_clear(self):
477 """ 478 Clears any recorded exception. 479 480 This also changes the "exception_raise" attribute to point 481 to the appropriate do-nothing method. 482 """ 483 self.exception = (None, None, None) 484 self.exception_raise = self._no_exception_to_raise
485
486 - def exception_set(self, exception=None):
487 """ 488 Records an exception to be raised at the appropriate time. 489 490 This also changes the "exception_raise" attribute to point 491 to the method that will, in fact 492 """ 493 if not exception: 494 exception = sys.exc_info() 495 self.exception = exception 496 self.exception_raise = self._exception_raise
497
498 - def _no_exception_to_raise(self):
499 pass
500
501 - def _exception_raise(self):
502 """ 503 Raises a pending exception that was recorded while getting a 504 Task ready for execution. 505 """ 506 exc = self.exc_info()[:] 507 try: 508 exc_type, exc_value, exc_traceback = exc 509 except ValueError: 510 exc_type, exc_value = exc 511 exc_traceback = None 512 raise exc_type, exc_value, exc_traceback
513
514 -class AlwaysTask(Task):
515 - def needs_execute(self):
516 """ 517 Always returns True (indicating this Task should always 518 be executed). 519 520 Subclasses that need this behavior (as opposed to the default 521 of only executing Nodes that are out of date w.r.t. their 522 dependencies) can use this as follows: 523 524 class MyTaskSubclass(SCons.Taskmaster.Task): 525 needs_execute = SCons.Taskmaster.Task.execute_always 526 """ 527 return True
528
529 -class OutOfDateTask(Task):
530 - def needs_execute(self):
531 """ 532 Returns True (indicating this Task should be executed) if this 533 Task's target state indicates it needs executing, which has 534 already been determined by an earlier up-to-date check. 535 """ 536 return self.targets[0].get_state() == SCons.Node.executing
537 538
539 -def find_cycle(stack, visited):
540 if stack[-1] in visited: 541 return None 542 visited.add(stack[-1]) 543 for n in stack[-1].waiting_parents: 544 stack.append(n) 545 if stack[0] == stack[-1]: 546 return stack 547 if find_cycle(stack, visited): 548 return stack 549 stack.pop() 550 return None
551 552
553 -class Taskmaster(object):
554 """ 555 The Taskmaster for walking the dependency DAG. 556 """ 557
558 - def __init__(self, targets=[], tasker=None, order=None, trace=None):
559 self.original_top = targets 560 self.top_targets_left = targets[:] 561 self.top_targets_left.reverse() 562 self.candidates = [] 563 if tasker is None: 564 tasker = OutOfDateTask 565 self.tasker = tasker 566 if not order: 567 order = lambda l: l 568 self.order = order 569 self.message = None 570 self.trace = trace 571 self.next_candidate = self.find_next_candidate 572 self.pending_children = set()
573
574 - def find_next_candidate(self):
575 """ 576 Returns the next candidate Node for (potential) evaluation. 577 578 The candidate list (really a stack) initially consists of all of 579 the top-level (command line) targets provided when the Taskmaster 580 was initialized. While we walk the DAG, visiting Nodes, all the 581 children that haven't finished processing get pushed on to the 582 candidate list. Each child can then be popped and examined in 583 turn for whether *their* children are all up-to-date, in which 584 case a Task will be created for their actual evaluation and 585 potential building. 586 587 Here is where we also allow candidate Nodes to alter the list of 588 Nodes that should be examined. This is used, for example, when 589 invoking SCons in a source directory. A source directory Node can 590 return its corresponding build directory Node, essentially saying, 591 "Hey, you really need to build this thing over here instead." 592 """ 593 try: 594 return self.candidates.pop() 595 except IndexError: 596 pass 597 try: 598 node = self.top_targets_left.pop() 599 except IndexError: 600 return None 601 self.current_top = node 602 alt, message = node.alter_targets() 603 if alt: 604 self.message = message 605 self.candidates.append(node) 606 self.candidates.extend(self.order(alt)) 607 node = self.candidates.pop() 608 return node
609
610 - def no_next_candidate(self):
611 """ 612 Stops Taskmaster processing by not returning a next candidate. 613 614 Note that we have to clean-up the Taskmaster candidate list 615 because the cycle detection depends on the fact all nodes have 616 been processed somehow. 617 """ 618 while self.candidates: 619 candidates = self.candidates 620 self.candidates = [] 621 self.will_not_build(candidates) 622 return None
623
624 - def _validate_pending_children(self):
625 """ 626 Validate the content of the pending_children set. Assert if an 627 internal error is found. 628 629 This function is used strictly for debugging the taskmaster by 630 checking that no invariants are violated. It is not used in 631 normal operation. 632 633 The pending_children set is used to detect cycles in the 634 dependency graph. We call a "pending child" a child that is 635 found in the "pending" state when checking the dependencies of 636 its parent node. 637 638 A pending child can occur when the Taskmaster completes a loop 639 through a cycle. For example, lets imagine a graph made of 640 three node (A, B and C) making a cycle. The evaluation starts 641 at node A. The taskmaster first consider whether node A's 642 child B is up-to-date. Then, recursively, node B needs to 643 check whether node C is up-to-date. This leaves us with a 644 dependency graph looking like: 645 646 Next candidate \ 647 \ 648 Node A (Pending) --> Node B(Pending) --> Node C (NoState) 649 ^ | 650 | | 651 +-------------------------------------+ 652 653 Now, when the Taskmaster examines the Node C's child Node A, 654 it finds that Node A is in the "pending" state. Therefore, 655 Node A is a pending child of node C. 656 657 Pending children indicate that the Taskmaster has potentially 658 loop back through a cycle. We say potentially because it could 659 also occur when a DAG is evaluated in parallel. For example, 660 consider the following graph: 661 662 663 Node A (Pending) --> Node B(Pending) --> Node C (Pending) --> ... 664 | ^ 665 | | 666 +----------> Node D (NoState) --------+ 667 / 668 Next candidate / 669 670 The Taskmaster first evaluates the nodes A, B, and C and 671 starts building some children of node C. Assuming, that the 672 maximum parallel level has not been reached, the Taskmaster 673 will examine Node D. It will find that Node C is a pending 674 child of Node D. 675 676 In summary, evaluating a graph with a cycle will always 677 involve a pending child at one point. A pending child might 678 indicate either a cycle or a diamond-shaped DAG. Only a 679 fraction of the nodes ends-up being a "pending child" of 680 another node. This keeps the pending_children set small in 681 practice. 682 683 We can differentiate between the two cases if we wait until 684 the end of the build. At this point, all the pending children 685 nodes due to a diamond-shaped DAG will have been properly 686 built (or will have failed to build). But, the pending 687 children involved in a cycle will still be in the pending 688 state. 689 690 The taskmaster removes nodes from the pending_children set as 691 soon as a pending_children node moves out of the pending 692 state. This also helps to keep the pending_children set small. 693 """ 694 695 for n in self.pending_children: 696 assert n.state in (NODE_PENDING, NODE_EXECUTING), \ 697 (str(n), StateString[n.state]) 698 assert len(n.waiting_parents) != 0, (str(n), len(n.waiting_parents)) 699 for p in n.waiting_parents: 700 assert p.ref_count > 0, (str(n), str(p), p.ref_count)
701 702
703 - def trace_message(self, message):
704 return 'Taskmaster: %s\n' % message
705
706 - def trace_node(self, node):
707 return '<%-10s %-3s %s>' % (StateString[node.get_state()], 708 node.ref_count, 709 repr(str(node)))
710
711 - def _find_next_ready_node(self):
712 """ 713 Finds the next node that is ready to be built. 714 715 This is *the* main guts of the DAG walk. We loop through the 716 list of candidates, looking for something that has no un-built 717 children (i.e., that is a leaf Node or has dependencies that are 718 all leaf Nodes or up-to-date). Candidate Nodes are re-scanned 719 (both the target Node itself and its sources, which are always 720 scanned in the context of a given target) to discover implicit 721 dependencies. A Node that must wait for some children to be 722 built will be put back on the candidates list after the children 723 have finished building. A Node that has been put back on the 724 candidates list in this way may have itself (or its sources) 725 re-scanned, in order to handle generated header files (e.g.) and 726 the implicit dependencies therein. 727 728 Note that this method does not do any signature calculation or 729 up-to-date check itself. All of that is handled by the Task 730 class. This is purely concerned with the dependency graph walk. 731 """ 732 733 self.ready_exc = None 734 735 T = self.trace 736 if T: T.write(u'\n' + self.trace_message('Looking for a node to evaluate')) 737 738 while True: 739 node = self.next_candidate() 740 if node is None: 741 if T: T.write(self.trace_message('No candidate anymore.') + u'\n') 742 return None 743 744 node = node.disambiguate() 745 state = node.get_state() 746 747 # For debugging only: 748 # 749 # try: 750 # self._validate_pending_children() 751 # except: 752 # self.ready_exc = sys.exc_info() 753 # return node 754 755 if CollectStats: 756 if not hasattr(node, 'stats'): 757 node.stats = Stats() 758 StatsNodes.append(node) 759 S = node.stats 760 S.considered = S.considered + 1 761 else: 762 S = None 763 764 if T: T.write(self.trace_message(u' Considering node %s and its children:' % self.trace_node(node))) 765 766 if state == NODE_NO_STATE: 767 # Mark this node as being on the execution stack: 768 node.set_state(NODE_PENDING) 769 elif state > NODE_PENDING: 770 # Skip this node if it has already been evaluated: 771 if S: S.already_handled = S.already_handled + 1 772 if T: T.write(self.trace_message(u' already handled (executed)')) 773 continue 774 775 executor = node.get_executor() 776 777 try: 778 children = executor.get_all_children() 779 except SystemExit: 780 exc_value = sys.exc_info()[1] 781 e = SCons.Errors.ExplicitExit(node, exc_value.code) 782 self.ready_exc = (SCons.Errors.ExplicitExit, e) 783 if T: T.write(self.trace_message(' SystemExit')) 784 return node 785 except Exception, e: 786 # We had a problem just trying to figure out the 787 # children (like a child couldn't be linked in to a 788 # VariantDir, or a Scanner threw something). Arrange to 789 # raise the exception when the Task is "executed." 790 self.ready_exc = sys.exc_info() 791 if S: S.problem = S.problem + 1 792 if T: T.write(self.trace_message(' exception %s while scanning children.\n' % e)) 793 return node 794 795 children_not_visited = [] 796 children_pending = set() 797 children_not_ready = [] 798 children_failed = False 799 800 for child in chain(executor.get_all_prerequisites(), children): 801 childstate = child.get_state() 802 803 if T: T.write(self.trace_message(u' ' + self.trace_node(child))) 804 805 if childstate == NODE_NO_STATE: 806 children_not_visited.append(child) 807 elif childstate == NODE_PENDING: 808 children_pending.add(child) 809 elif childstate == NODE_FAILED: 810 children_failed = True 811 812 if childstate <= NODE_EXECUTING: 813 children_not_ready.append(child) 814 815 816 # These nodes have not even been visited yet. Add 817 # them to the list so that on some next pass we can 818 # take a stab at evaluating them (or their children). 819 children_not_visited.reverse() 820 self.candidates.extend(self.order(children_not_visited)) 821 #if T and children_not_visited: 822 # T.write(self.trace_message(' adding to candidates: %s' % map(str, children_not_visited))) 823 # T.write(self.trace_message(' candidates now: %s\n' % map(str, self.candidates))) 824 825 # Skip this node if any of its children have failed. 826 # 827 # This catches the case where we're descending a top-level 828 # target and one of our children failed while trying to be 829 # built by a *previous* descent of an earlier top-level 830 # target. 831 # 832 # It can also occur if a node is reused in multiple 833 # targets. One first descends though the one of the 834 # target, the next time occurs through the other target. 835 # 836 # Note that we can only have failed_children if the 837 # --keep-going flag was used, because without it the build 838 # will stop before diving in the other branch. 839 # 840 # Note that even if one of the children fails, we still 841 # added the other children to the list of candidate nodes 842 # to keep on building (--keep-going). 843 if children_failed: 844 for n in executor.get_action_targets(): 845 n.set_state(NODE_FAILED) 846 847 if S: S.child_failed = S.child_failed + 1 848 if T: T.write(self.trace_message('****** %s\n' % self.trace_node(node))) 849 continue 850 851 if children_not_ready: 852 for child in children_not_ready: 853 # We're waiting on one or more derived targets 854 # that have not yet finished building. 855 if S: S.not_built = S.not_built + 1 856 857 # Add this node to the waiting parents lists of 858 # anything we're waiting on, with a reference 859 # count so we can be put back on the list for 860 # re-evaluation when they've all finished. 861 node.ref_count = node.ref_count + child.add_to_waiting_parents(node) 862 if T: T.write(self.trace_message(u' adjusted ref count: %s, child %s' % 863 (self.trace_node(node), repr(str(child))))) 864 865 if T: 866 for pc in children_pending: 867 T.write(self.trace_message(' adding %s to the pending children set\n' % 868 self.trace_node(pc))) 869 self.pending_children = self.pending_children | children_pending 870 871 continue 872 873 # Skip this node if it has side-effects that are 874 # currently being built: 875 wait_side_effects = False 876 for se in executor.get_action_side_effects(): 877 if se.get_state() == NODE_EXECUTING: 878 se.add_to_waiting_s_e(node) 879 wait_side_effects = True 880 881 if wait_side_effects: 882 if S: S.side_effects = S.side_effects + 1 883 continue 884 885 # The default when we've gotten through all of the checks above: 886 # this node is ready to be built. 887 if S: S.build = S.build + 1 888 if T: T.write(self.trace_message(u'Evaluating %s\n' % 889 self.trace_node(node))) 890 891 # For debugging only: 892 # 893 # try: 894 # self._validate_pending_children() 895 # except: 896 # self.ready_exc = sys.exc_info() 897 # return node 898 899 return node 900 901 return None
902
903 - def next_task(self):
904 """ 905 Returns the next task to be executed. 906 907 This simply asks for the next Node to be evaluated, and then wraps 908 it in the specific Task subclass with which we were initialized. 909 """ 910 node = self._find_next_ready_node() 911 912 if node is None: 913 return None 914 915 tlist = node.get_executor().get_all_targets() 916 917 task = self.tasker(self, tlist, node in self.original_top, node) 918 try: 919 task.make_ready() 920 except: 921 # We had a problem just trying to get this task ready (like 922 # a child couldn't be linked in to a VariantDir when deciding 923 # whether this node is current). Arrange to raise the 924 # exception when the Task is "executed." 925 self.ready_exc = sys.exc_info() 926 927 if self.ready_exc: 928 task.exception_set(self.ready_exc) 929 930 self.ready_exc = None 931 932 return task
933
934 - def will_not_build(self, nodes, node_func=lambda n: None):
935 """ 936 Perform clean-up about nodes that will never be built. Invokes 937 a user defined function on all of these nodes (including all 938 of their parents). 939 """ 940 941 T = self.trace 942 943 pending_children = self.pending_children 944 945 to_visit = set(nodes) 946 pending_children = pending_children - to_visit 947 948 if T: 949 for n in nodes: 950 T.write(self.trace_message(' removing node %s from the pending children set\n' % 951 self.trace_node(n))) 952 try: 953 while len(to_visit): 954 node = to_visit.pop() 955 node_func(node) 956 957 # Prune recursion by flushing the waiting children 958 # list immediately. 959 parents = node.waiting_parents 960 node.waiting_parents = set() 961 962 to_visit = to_visit | parents 963 pending_children = pending_children - parents 964 965 for p in parents: 966 p.ref_count = p.ref_count - 1 967 if T: T.write(self.trace_message(' removing parent %s from the pending children set\n' % 968 self.trace_node(p))) 969 except KeyError: 970 # The container to_visit has been emptied. 971 pass 972 973 # We have the stick back the pending_children list into the 974 # taskmaster because the python 1.5.2 compatibility does not 975 # allow us to use in-place updates 976 self.pending_children = pending_children
977
978 - def stop(self):
979 """ 980 Stops the current build completely. 981 """ 982 self.next_candidate = self.no_next_candidate
983
984 - def cleanup(self):
985 """ 986 Check for dependency cycles. 987 """ 988 if not self.pending_children: 989 return 990 991 nclist = [(n, find_cycle([n], set())) for n in self.pending_children] 992 993 genuine_cycles = [ 994 node for node,cycle in nclist 995 if cycle or node.get_state() != NODE_EXECUTED 996 ] 997 if not genuine_cycles: 998 # All of the "cycles" found were single nodes in EXECUTED state, 999 # which is to say, they really weren't cycles. Just return. 1000 return 1001 1002 desc = 'Found dependency cycle(s):\n' 1003 for node, cycle in nclist: 1004 if cycle: 1005 desc = desc + " " + " -> ".join(map(str, cycle)) + "\n" 1006 else: 1007 desc = desc + \ 1008 " Internal Error: no cycle found for node %s (%s) in state %s\n" % \ 1009 (node, repr(node), StateString[node.get_state()]) 1010 1011 raise SCons.Errors.UserError(desc)
1012 1013 # Local Variables: 1014 # tab-width:4 1015 # indent-tabs-mode:nil 1016 # End: 1017 # vim: set expandtab tabstop=4 shiftwidth=4: 1018