DESCRIPTION

The scons-time command runs an SCons configuration through a standard set of profiled timings and can extract and graph information from the resulting profiles and log files of those timings. The action to be performed by the scons-time script is specified by a subcommand, the first argument on the command line. See the SUBCOMMANDS section below for information about the operation of specific subcommands.

The basic way to use scons-time is to run the scons-time run subcommand (possibly multiple times) to generate profile and log file output, and then use one of the other subcommands to display the results captured in the profiles and log files for a particular kind of information: function timings (the scons-time func subcommand), total memory used (the scons-time mem subcommand), object counts (the scons-time obj subcommand) and overall execution time (the scons-time time subcommand). Options exist to place and find the profiles and log files in separate directories, to generate the output in a format suitable for graphing with the gnuplot(1) program, and so on.

There are two basic ways the scons-time run subcommand is intended to be used to gather timing statistics for a configuration. One is to use the --svn= option to test a configuration against a list of revisions from the SCons Subversion repository. This will generate a profile and timing log file for every revision listed with the --number= option, and can be used to look at the impact of committed changes to the SCons code base on a particular configuration over time.

The other way is to profile incremental changes to a local SCons code base during a development cycle--that is, to look at the performance impact of changes you're making in the local tree. In this mode, you run the scons-time run subcommand without the --svn= option, in which case it simply looks in the profile/log file output directory (the current directory by default) and automatically figures out the next run number for the output profile and log file. Used in this way, the development cycle goes something like: make a change to SCons; run scons-time run to profile it against a specific configuration; make another change to SCons; run scons-time run again to profile it; etc.

SUBCOMMANDS

The scons-time command supports the following individual subcommands.

The func Subcommand

scons-time func [-h] [--chdir=DIR] [-f FILE] [--fmt=FORMAT] [--func=NAME] [-p STRING] [-t NUMBER] [--title= TITLE] [ARGUMENTS]

The scons-time func subcommand displays timing information for a specific Python function within SCons. By default, it extracts information about the _main() function, which includes the Python profiler timing for all of SCons.

The scons-time func subcommand extracts function timing information from all the specified file arguments, which should be Python profiler output files. (Normally, these would be *.prof files generated by the scons-time run subcommand, but they can actually be generated by any Python profiler invocation.) All file name arguments will be globbed for on-disk files.

If no arguments are specified, then function timing information will be extracted from all *.prof files, or the subset of them with a prefix specified by the -p option.

Options include:

-C DIRECTORY, --chdir=DIRECTORY

Changes to the specified DIRECTORY before looking for the specified files (or files that match the specified patterns).

-f FILE, --file=FILE

Reads configuration information from the specified FILE.

-fmt=FORMAT, --format=FORMAT

Reports the output in the specified FORMAT. The formats currently supported are ascii (the default) and gnuplot.

--func=NAME

Extracts timings for the specified function NAME. The default is to report cumulative timings for the _main() function, which contains the entire SCons run.

-h, --help

Displays help text for the scons-time func subcommand.

-p STRING, --prefix=STRING

Specifies the prefix string for profiles from which to extract function timing information. This will be used to search for profiles if no arguments are specified on the command line.

-t NUMBER, --tail=NUMBER

Only extracts function timings from the last NUMBER files.

The mem Subcommand

scons-time mem [-h] [--chdir=DIR] [-f FILE] [--fmt=FORMAT] [-p STRING] [--stage=STAGE] [-t NUMBER] [--title=TITLE] [ARGUMENTS]

The scons-time mem subcommand displays how much memory SCons uses.

The scons-time mem subcommand extracts memory use information from all the specified file arguments, which should be files containing output from running SCons with the --debug=memory option. (Normally, these would be *.log files generated by the scons-time run subcommand.) All file name arguments will be globbed for on-disk files.

If no arguments are specified, then memory information will be extracted from all *.log files, or the subset of them with a prefix specified by the -p option.

-C DIR, --chdir=DIR

Changes to the specified DIRECTORY before looking for the specified files (or files that match the specified patterns).

-f FILE, --file=FILE

Reads configuration information from the specified FILE.

-fmt=FORMAT, --format=FORMAT

Reports the output in the specified FORMAT. The formats currently supported are ascii (the default) and gnuplot.

-h, --help

Displays help text for the scons-time mem subcommand.

-p STRING, --prefix=STRING

Specifies the prefix string for log files from which to extract memory usage information. This will be used to search for log files if no arguments are specified on the command line.

--stage=STAGE

Prints the memory used at the end of the specified STAGE: pre-read (before the SConscript files are read), post-read , (after the SConscript files are read), pre-build (before any targets are built) or post-build (after any targets are built). If no --stage option is specified, the default behavior is post-build, which reports the final amount of memory used by SCons during each run.

-t NUMBER, --tail=NUMBER

Only reports memory statistics from the last NUMBER files.

The obj Subcommand

scons-time obj [-h] [--chdir=DIR] [-f FILE] [--fmt=FORMAT] [-p STRING] [--stage=STAGE] [-t NUMBER] [--title=TITLE] [ARGUMENTS]

The scons-time obj subcommand displays how many objects of a specific named type are created by SCons.

The scons-time obj subcommand extracts object counts from all the specified file arguments, which should be files containing output from running SCons with the --debug=count option. (Normally, these would be *.log files generated by the scons-time run subcommand.) All file name arguments will be globbed for on-disk files.

If no arguments are specified, then object counts will be extracted from all *.log files, or the subset of them with a prefix specified by the -p option.

-C DIR, --chdir=DIR

Changes to the specified DIRECTORY before looking for the specified files (or files that match the specified patterns).

-f FILE, --file=FILE

Reads configuration information from the specified FILE.

-fmt=FORMAT, --format=FORMAT

Reports the output in the specified FORMAT. The formats currently supported are ascii (the default) and gnuplot.

-h, --help

Displays help text for the scons-time obj subcommand.

-p STRING, --prefix=STRING

Specifies the prefix string for log files from which to extract object counts. This will be used to search for log files if no arguments are specified on the command line.

--stage=STAGE

Prints the object count at the end of the specified STAGE: pre-read (before the SConscript files are read), post-read , (after the SConscript files are read), pre-build (before any targets are built) or post-build (after any targets are built). If no --stage option is specified, the default behavior is post-build, which reports the final object count during each run.

-t NUMBER, --tail=NUMBER

Only reports object counts from the last NUMBER files.

The run Subcommand

scons-time run [-hnqv] [-f FILE] [--number=NUMBER] [--outdir=OUTDIR] [-p STRING] [--python=PYTHON] [-s DIR] [--scons=SCONS] [--svn=URL] [ARGUMENTS] The scons-time run subcommand is the basic subcommand for profiling a specific configuration against a version of SCons.

The configuration to be tested is specified as a list of files or directories that will be unpacked or copied into a temporary directory in which SCons will be invoked. The scons-time run subcommand understands file suffixes like .tar, .tar.gz, .tgz and .zip and will unpack their contents into a temporary directory. If more than one argument is specified, each one will be unpacked or copied into the temporary directory "on top of" the previous archives or directories, so the expectation is that multiple specified archives share the same directory layout.

Once the file or directory arguments are unpacked or copied to the temporary directory, the scons-time run subcommand runs the requested version of SCons against the configuration three times:

Startup

SCons is run with the --help option so that just the SConscript files are read, and then the default help text is printed. This profiles just the perceived "overhead" of starting up SCons and processing the SConscript files.

Full build

SCons is run to build everything specified in the configuration. Specific targets to be passed in on the command l ine may be specified by the targets keyword in a configuration file; see below for details.

Rebuild

SCons is run again on the same just-built directory. If the dependencies in the SCons configuration are correct, this should be an up-to-date, "do nothing" rebuild.

Each invocation captures the output log file and a profile.

The scons-time run subcommand supports the following options:

-f FILE, --file=FILE

Reads configuration information from the specified FILE. This often provides a more convenient way to specify and collect parameters associated with a specific timing configuration than specifying them on the command line. See the CONFIGURATION FILE section below for information about the configuration file parameters.

-h, --help

Displays help text for the scons-time run subcommand.

-n, --no-exec

Do not execute commands, just printing the command-line equivalents of what would be executed. Note that the scons-time script actually executes its actions in Python, where possible, for portability. The commands displayed are UNIX equivalents of what it's doing.

--number=NUMBER

Specifies the run number to be used in the names of the log files and profile outputs generated by this run.

When used in conjunction with the --svn=URL option, NUMBER specifies one or more comma-separated Subversion revision numbers that will be retrieved automatically from the Subversion repository at the specified URL. Ranges of delta or revision numbers may be specified be separating two numbers with a hyphen (-).

Example:

% scons-time run --svn=http://scons.tigris.org/svn/trunk --num=1247,1249-1252 .
-p STRING, --prefix=STRING

Specifies the prefix string to be used for all of the log files and profiles generated by this run. The default is derived from the first specified argument: if the first argument is a directory, the default prefix is the name of the directory; if the first argument is an archive (tar or zip file), the default prefix is the the base name of the archive, that is, what remains after stripping the archive suffix (.tgz, .tar.gz or .zip).

--python=PYTHON

Specifies a path to the Python executable to be used for the timing runs. The default is to use the same Python executable that is running the scons-time command itself.

-q, --quiet

Suppresses display of the command lines being executed.

-s DIR, --subdir=DIR

Specifies the name of directory or subdirectory from which the commands should be executed. The default is XXX

--scons=SCONS

Specifies a path to the SCons script to be used for the timing runs. The default is XXX

--svn=URL, --subversion=URL

Specifies the URL of the Subversion repository from which the version(s) of scons being timed will be extracted. When --svn is specified, the --number=NUMBER option specifies revision numbers that will be tested. Output from each invocation run will be placed in file names that match the Subversion revision numbers. If the --number= option is not specified, then the default behavior is to time the HEAD of the specified URL.

-v, --verbose

Displays the output from individual commands to the screen (in addition to capturing the output in log files).

The time Subcommand

scons-time time [-h] [--chdir=DIR] [-f FILE] [--fmt=FORMAT] [-p STRING] [-t NUMBER] [--title=TITLE] [--which=WHICH] [ARGUMENTS]

The scons-time time subcommand displays SCons execution times as reported by the scons --debug=time option.

The scons-time time subcommand extracts SCons timing from all the specified file arguments, which should be files containing output from running SCons with the --debug=time option. (Normally, these would be *.log files generated by the scons-time run subcommand.) All file name arguments will be globbed for on-disk files.

If no arguments are specified, then execution timings will be extracted from all *.log files, or the subset of them with a prefix specified by the -p option.

-C DIR, --chdir=DIR

Changes to the specified DIRECTORY before looking for the specified files (or files that match the specified patterns).

-f FILE, --file=FILE

Reads configuration information from the specified FILE.

-fmt=FORMAT, --format=FORMAT

Reports the output in the specified FORMAT. The formats currently supported are ascii (the default) and gnuplot.

-h, --help

Displays help text for the scons-time time subcommand.

-p STRING, --prefix=STRING

Specifies the prefix string for log files from which to extract execution timings. This will be used to search for log files if no arguments are specified on the command line.

-t NUMBER, --tail=NUMBER

Only reports object counts from the last NUMBER files.

--which=WHICH

Prints the execution time for the specified WHICH value: total (the total execution time), SConscripts (total execution time for the SConscript files themselves), SCons (exectuion time in SCons code itself) or commands (execution time of the commands and other actions used to build targets). If no --which option is specified, the default behavior is total, which reports the total execution time for each run.

CONFIGURATION FILE

Various scons-time subcommands can read information from a specified configuration file when passed the -f or --file options. The configuration file is actually executed as a Python script. Setting Python variables in the configuration file controls the behavior of the scons-time script more conveniently than having to specify command-line options or arguments for every run, and provides a handy way to "shrink-wrap" the necessary information for producing (and reporting) consistent timing runs for a given configuration.

archive_list

A list of archives (files or directories) that will be copied to the temporary directory in which SCons will be invoked. .tar, .tar.gz, .tgz and .zip files will have their contents unpacked in the temporary directory. Directory trees and files will be copied as-is.

initial_commands

A list of commands that will be executed before the actual timed scons runs. This can be used for commands that are necessary to prepare the source tree-for example, creating a configuration file that should not be part of the timed run.

key_location

The location of the key on Gnuplot graphing information generated with the --format=gnuplot option. The default is bottom left.

prefix

The file name prefix to be used when running or extracting timing for this configuration.

python

The path name of the Python executable to be used when running or extracting information for this configuration. The default is the same version of Python used to run the SCons

scons

The path name of the SCons script to be used when running or extracting information for this configuration. The default is simply scons.

scons_flags

The scons flags used when running SCons to collect timing information. The default value is --debug=count --debug=memory --debug=time --debug=memoizer.

scons_lib_dir
scons_wrapper
startup_targets
subdir

The subdirectory of the project into which the scons-time script should change before executing the SCons commands to time.

subversion_url

The Subversion URL from

svn

The subversion executable used to check out revisions of SCons to be timed. The default is simple svn.

svn_co_flag
tar
targets

A string containing the targets that should be added to the command line of every timed scons run. This can be used to restrict what's being timed to a subset of the full build for the configuration.

targets0
targets1
targets2
title
unzip
verbose
vertical_bars